fbpx

RGG PRECISION NIPPERS SUPPORT

Why is there traces of oil on my blade?

This is perfectly normal. The blade is lightly coated in oil to keep the tool in prime condition. Please wipe off  before use.

Can I cut metal parts with my nippers?

No.RGG precision nippers are designed to cut plastics (PS,PP,ABS,PE) and resins only. Please do not exceed max 3mm

My nippers doesn't open properly

The blades are very sharp and very thin. They are set at the factory to close and open effortlessly.

However, sometimes when the two blades are pressed together, the blades overlap a little bit causing a temporary sticking effect.

It can be fixed by adjusting the 2 blades so they don’t overlap anymore. First, close the blades together. Just when they touch, make sure they’re not overlapping even by a little. If they do, adjust the 2 blades using a 1.5mm hex key or Allen key. See the picture for details. 

I need further assistance with my RGG nippers

You didn’t find the answer you were looking for? Please feel free to contact us

I need assistance with my order
Click here